Summary: One of the two devices stopped powering on after less than 1 week of use. A call to DLink for replacement was useless, and the tech support refused to give me an RMA for a clearly defective device. Avoid this at all costs.
Summary: After unpackaging one device out of the pair was dead - power led just blinks once when power is connected and then it plays dead. I requested replacement and in the second pair one of the devices only had wireless led lit, put no power led and otherwise totally unresponsive.
Summary: I had the same problem as the other person who reviewed. One unit died in 5 minutes the other lasted about 20 minutes. Both now have a solid red power LED. To be sure it was the unit, I tried other Dlink 5VDC power adapters and the units still did not function.
Summary: I purchased the D-Link DAP-1562 set in late January 2011. The system operated fine for four months until the number 2 unit failed. Invested over 2.5 hours on the telephone with the overseas based technical team before anyone could even identify the model number and trouble shoot.
Summary: This product is simply not ready for release. I purchased 2 kits, so 4 units in total. Two died within an hour of turning them on (as in, they either won't power up, or the power light stays red and the unit will not be operational).
The first wi-fi bridge that gave me 100mbps+ speeds
Waqas A., Amazon
1 February 2011
Summary: My file server PC and my home theater PC are at nearly opposite ends of my home - separated by a floor and 5 interior walls. Over the past 3 years I've tried multiple options to get fast enough speeds to stream 1080p HD video content between the two.
Summary: I have tried various options including WRT610N+ USB600N but couldnot get the reliable connectivity across 1 floor and 4 walls. It may be because of very dense neighborhood with 10-15 APs and causing lot of interference. This device comes with single eth port so you need multiple of such Kits.