Specifications

2x 10/100 Base-Tx RJ-45 ports

1x USB for connecting to USB printer or 3G USB Modem

Defense Viruses, Worms and Trojan

Scan POP3

Scan IMAP

Scan ZIP / GZIP / BZIP2

Automatic update latest virus signature to device

Scan FTP

Pass / Disallow / Reset while Intrusion is Detected

Automatic alert when signature update service expired

Real-time scan SMTP, POP3

Real-time syslog alert when spam is detected

Multi Type ( graphic, document, HTML ) Detection

No User Limitation

WAN Connection Fail-over

Outbound Policy-based Load-balance

LAN-to-LAN, Teleworker-to-LAN

NAT-Traversal ( NAT-T )

Dead Peer Detection ( DPD )

IPSec

PPTP

Hardware-based AES / DES / 3DES

Hardware-based MD5

Digital Signature ( X.509 )

Web Application

Multi-NAT, DMZ Host, Port-redirection and Open Port

SPI ( Stateful Packet Inspection )

IP Address Anti-spoofing

Bind IP to MAC Address

URL Content Filter ( White List and Black List )

Web Content Filter ( SurfControl )

Time Schedule Control

Dynamic DNS

Call Scheduling

DNS Cache / Proxy

Static Routing

IGMPv2 Proxy

Quick Start Wizard

Administration Access Control

Built-in Diagnostic Function

Logging via Syslog

Class-based Bandwidth Guarantee by User-defined Traffic Categories

4-level Priority for Each Direction ( Inbound / Outbound )

Bandwidth / Session Limitation

Storage : -25°C ~ 70°C

Conventional firewalls only inspect packets connection behavior to against any connection-based attack. While the content-based threats today. such as virus, worms, Trojans or banned content, which spread faster and do more damage. Conventional firewalls bypass the widely spread content-based threat and expose internal network to outside world. VigorPro5500 deploys DrayTek's unique MSSIâ„¢ ( Multi-stack Stateful Inspection) mechanism. With MSSIâ„¢ , VigorPro5500 inspects packet streams, compares any suspected content or behavior with build-in database in real-time, and provide inline anti-virus and anti-intrusion protection. Figure 4. Content-based Inline Inspection

Content-based Inline Inspection

Conventional way to protect against virus or malicious program, requires each host to install software on the host. To install software on a large number of hosts is a time consuming process. To evaluate the vulnerabilities, both scan engine and database of virus pattern need constant upgrade. It is very costly and annoying for IT personnel with high maintenance. VigorPro 5510 works as firewall as well as Internet gateway, it will block any attacks at the point of network entry. Through the web user interface, the network administrator can monitor and instruct the VigorPro 5510 to look for all hosts inside network edge before threats intrude. Figure 2. Network-level Protection

DrayTek supports 3G HSDPA USB Modem via USB port of VigorPro 5510 from firmware version V3.2.2 and above. It is a good application for the mobile sharing environment. For 3G mobile communication through Access Point is popular more and more, VigorPro 5510 adds the function of 3G network connection for such purpose. By connecting 3G USB Modem to the USB port of VigorPro 5510, it can support HSDPA/UMTS/EDGE/GPRS/GSM and the future 3G standard ( HSDPA, etc ). VigorPro 5510 with 3G USB Modem allows you to receive 3G signals at any place such as your car or certain location holding outdoor activity and share the bandwidth for using by more people. Users can use four LAN ports on the router to access Internet. Figure 5. 3G Application

10% ~ 90% ( non-condensing )

L273 * W166 * H44.6 ( mm )