www.testfreaks.com

Reviews, reviews, reviews...

Delfield-uc4432n-ucd4432n.1072346

Delfield UC4432N, UCD4432N

Versatile, High Performance Units Designed to work in the real w Read more

Great Deal: $1,693.87

Specifications

Feature
Value
Comment
Weight
280 lb (127.0080 kg)
Power Output
7.2  Amps
Exterior Top
Exterior top is one-piece, 22-gauge stainless steel with integral square nosing on the front.
Exterior back and bottom
Exterior back and bottom are two-piece 24-gauge galvanized steel.
Exterior ends
Exterior ends are stainless steel.
Interior sides of door models
Interior sides of door models are thermoformed ABS plastic with integral shelves supports. Interior back is onepiece 22-gauge stainless steel. Interior bottom and top are thermoforned ABS plastic. Base is fully insulated with high-density foamed in place polyurethane.
Refrigeration
Refrigeration system uses HFC-404A refrigerant. Compressor is 1/5 H.P., with condenser coil and condensate evaporator mounted on rear of the cabinet.Evaporator coil are located on the interior rear wall of the cabinet. Refrigerant flow is controlled by a capillary tube. Cabinet maintains an interior cabinet temperature of 36°F to 40°F (2°C to 4°C).
ACT control
ACT control. ACT electronic, solid state control, mounted on the exterior rear of the cabinet, allows unit to maintain precise temperatures in heavy duty conditions.
Doors
Doors have a 24-gauge stainless steel exterior, with thermoformed ABS plastic interior liner. Cabinet of door models has one adjustable epoxy-coated wire shelf.
Width x Depth x Height
32 1 / 8 " x 31 1 / 2 " x 34 1 / 4 " (68.90 cm x 80.01 cm x 87.00 cm)
Electrical Connections
Electrical connections are 115 volt, 60 Hertz, single phase. Unit has a 7ÂÂÂÂÂ’ (2.1m) long electrical cord and NEMA 5-15P plug.
Casters
Casters: Equipment is mounted on 2” (5.08cm) diameter front locking plate casters. 2.5” (6.35cm) ride height.
Drawers
Drawers have a 24-gauge stainless steel exterior with thermoformed ABS plastic interior liner. Drawer frames are 12-gauge stainless steel. Drawer slides are 11-gauge stainless steel with Delrin bearings. Drawer units have two drawers. Top drawer holds one 12” x 20” (30.5cm x 50.8cm x 10.1cm) and three 1/6 size 4"-6" deep pans. Bottom drawer holds one 12" x 20" and three 1/6 size 4" deep pans. Pans are supplied by others.
Release Date
First seen
25 June 2008