Sanyo LP-XU300

Sanyo LP-XU300

The Sanyo LP-XU300 is a projector with 786,432 (1024x768 with UXGA, WXGA and SXGA resizing possible) x 3 LCD panel (for a total of 2359293 pixels) that measures 0.63 inch x 3 with an aspect ratio of 4:3. It has a 1 - 1.2x zoom, f-22.35 - 26.8mm, F 1.6-F1.76 projection lens and utilizes a 225 W lamp. The screen size projected is 40-300 inch at a distance of 1.4 m – 12.7 m with full 16.77 million color reproducibility and 3000 ANSI lumens brightness. The projector’s scanning frequency is 15-100 kHz horizontal/Vertical at 140 MHz or less. The Sanyo LP-XU300 has PC input support via an analog RGB input and two D-Sub 15-pin (component input compatible), while video input support is via RCA (video) and S-Video connector, and audio input support is via an RCA (left and right) and Stereo mini jack input. Audio output support for the LP-XU300 is via a stereo mini jack and D-sub 9-pin (RS232C) control port. The LP-XU300 has a RJ45 (100 base – TX / 10 Base-T wired LAN support. It measures 326.0 x 83.1 x 231.6 mm and weighs 2.6 kg. The projector comes with a removable power cord, networking software (CD-ROM), D-sub to D-sub cable, soft carrying case, lens cap, PIN code label as well as an instruction manual. It also comes with a wireless remote control and AA batteries.

Features

The Sanyo LP-XU300 features an RGB liquid crystal shutter protection system with 3000 lumens brightness. This featured 3000 ANSI lumens brightness allows for high-brightness projection by the LP-XU300 even in a dimly lit room. The LP-XU300 has a compact design, with a Power-off and Go Function that allows users to pull out the power cord without having to wait for the projector to cool down. The projector also has a wide-range 1.2 x optical zoom lens that allows flexible placement of the projector in any parts of a room and built-in 1 W with 2.8 cm diameter speakers that allows multimedia presentations that has audio features in it. The Sanyo LP-XU300 also features an Auto Input Signal Search function which automatically performs the projector input settings when it is switched on, an Auto Vertical Keystone Correction function which eliminates vertical distortion for clearer image and a Guidance Function that display connection instructions on the projection screen when no signal is detected, enabling setup even for novice users, as well as for professional users.