Excerpt: this is the 2d lamp I have purchased from B&H. It came as and when expected-in fact ahead of time. The lamp works great, but didn't fix the problem I was having with the projector. It needed a new lamp as well.
Excerpt: Searched many sites for this lamp..this was the cheapest[...]This is fairly simple to install, but you must have a long, thin Phillips screwdriver.Installation instructions are available online, as well as with the unit.Installation time 30 minutes (and I am not skilled at this sort of work).
Excerpt: Buying this projector lamp was [...] frugal. [...].My issues were with the installation instuction in the Sony Manual (p. 65) which wrongly states that the lamp hours need to be reset by pushing the remote buttons for not more than 5 seconds each when in fact it means to say that all 4 buttons should be pressed (in order) very quickly.
Pros: Easy to use, Great picture quality, Reliable Performance
Excerpt: [...] The replacement lampcomes with the housing not just the bulb. Do not let anyone sell you the bulb. You have to take the housing apart to replace it. Most techs will not do this as I found out. When I received the replacement lamp w/housing from B&H it only took 25 minutes to install. Works great. Just buy it here and save a lot of time and trouble.
Pros: Easy To Set Up, Easy to use, Great picture quality, Reliable Performance
Excerpt: - I looked around and didn't find a better price than BHP- I did find a thread on the internet that people that said there was a way to only replace the bulb....and save $$$...but I'm no handyman, so i skipped it- you can do this installation while it's mounted to the ceiling, no problem- make sure you have 6" Phillips head....or it won't reach far enough!!!- when you try to screw it BACK in....make sure it's PUSHED TIGHTLY in first...