www.testfreaks.com

Reviews, reviews, reviews...

Barco-ov-815.8386501

Barco OV-815

Barco's OV-D2 series integrate cutting edge DLP™ technology into Read more

Best Price at Amazon

Specifications

Feature
Value
Comment
Resolution
SXGA+ (1400 x 1050px)
Absolute resolution
22 dpi
Luminous flux
1000 @ 6500K @ 132W
Color
100% EBU
Display technology
Rear projection DLP
DMD chip
1400 x 1050px 0.95" ±12°tilt DarkChip3 BrilliantColor™ LVDS MTBF:650,000 hours Lifetime: 100,000 hours
Image retention
No image retention or burn-in
Pixel accuracy
PixelTrue display, shows each pixel true to the input pixels without scaling or smoothing effects
Light source
• Lamp redundancy: cold standby or hot standby with redundant power supply • Automatic lamps witch by autosensing lamp failure • Lamp replacement: defect lamp can be hot-swapped without image loss • Lamp switch: dynamic feedback of brightness and color readjust video wall to equal performance • Lamp switching time: <1.5 seconds • I-lamp: intelligent lamp carries a.o. lamp life information & spectrum
Light source lifetime
120W: 10,000 hours 132W: 6,000 hours 180W: 6,000 hours (lamp manufacturer specs @ IEC 61947-1 test conditions)
Color wheel
Color wheel cartridge with MTTR <5 minutes 3x speed for better image representation Air bearing with rating of 50,000 hours
AC power
100-240 VAC, 60-50Hz
Power
(W) Cold standby Hot standby 120W < 250 < 390 132W < 275 < 430 180W < 335 < 550
Heat dissipation
(BTU/h) Cold standby Hot standby 120W < 850 < 1325 132W < 900 < 1375 180W < 1145 < 1875
Input/Output
1 x DVI-D in/out, 1 x Dual-link DVI-D in/out
Pixel clock
162 MHz | 270 MHz (On second input)
Input frequency
Multi sync 30Hz-75Hz
Genlock
49 – 61 Hz
Supported resolutions
VGA, SVGA, XGA, SXGA, SXGA+, UXGA, 1080p, dual XGA, triple XGA * , quad XGA * , dual SXGA+ * * On second input
Cropping
Yes
Scaling
Up- and down scaling (optional)
Barco Wall Control Manager
Graphical representation of video wall on operator PC Integrates separate video wall modules into a single display, allowing a.o. Sense 6 Client – server architecture provides central video wall logic with multiple access from multiple sites Health Status in the blink of an eye and support for trouble shooting Configuration of different settings Wall control by the operator Multiple access levels
Direct ethernet access
Projection module settings and control through standard ethernet browser. Easy and fast firmware upgrading over ethernet
Autodiagnostics
Projector self test
Integration to third party equipment
External video wall control from different devices through SOAP based API
Brightness
125 (@120W) / 140 (@132W) / 190 (@180W) cd/m²
Contrast
306001
White point
6,500K, natural lighting (special 32,00K option for backdrop)
Dimensions
• Diagonal: 80" nominal • Width: 1,600 mm / 63" • Heigth: 1,200 mm / 47.2" • Depth: 862.5 mm / 34" • Full Depth: 1,023 mm / 40.3" • Aspect ratio: 4:3 • Socket height: 875 - 1,000 - 1,200 mm / 34.5" - 39.4" - 47.2" • Socket height (min)= 640 mm, 550 mm upon request / 25.2", 21.7" upon request • Weight: 131.3 kg / 289 lbs
Release Date
First seen
24 June 2007