Summary: The fact that the web based admin interface didn't work with Google Chrome made setting this up take much longer than it needed to. I ended up using telnet to change the devices settings before realizing that the web interface works with Internet Exploder. Haven't had time to check for firmware updates, but this was a little irritating. How hard is it to make a web page work in all browsers (i.e. not hard). Besides this, I'm happy with the device, and would recommend it.
Pros: Full featured print server, low cost.
Cons: Web based administrative interface browser compatibility.
Summary: When I installed the first server, I didn't have to configure the Windows machine with a static IP. That may only be necessary under Windows 8.
Pros: Tiny - easily fits inside cable compartment of HP 6P. My first server failed for reasons unknown after 1+ years, but it had worked fine in the meantime so I bought another to replace it. I needed help getting it installed, but the ladies on the help desk were knowledgeable and patient.
Cons: Setup is awkward. It comes with the static IP address 192.168.0.10. You have to use the setup utility (a Windows program from the included CD, or downloaded from the TP-Link website) to reset it. But you first have to configure your Windows machine with a static IP address on that subnet (e.g., 192.168.0.100), or the setup utility cannot find the print server. That part is not explained in the documentation. The rest of the setup is straightforward. Once finished, you...
Summary: The TL-PS110P works well for windows documents, but fails to pass through some of simple printer control commands (form length, to be specific). I'll take this one home for the kids, but it's not for serious business use.
Summary: Printserver aangesloten op een Kyocera FS01030D in een netwerkje met zowel XP als W7 computers. Werkt naar behoren. Als er 2 opdrachten direct achter elkaar worden verzonden duurt het even voordat de 2e opdracht wordt geprint.