Summary: Still, it is 300W and has a 24pin motherboard connection where the Enlight had only 150 watts and a 20 pin motherboard connection. If I don't find anything that comes closer to the dimensions I need, I may just modify the case to make it fit.
Pros: I was needing an upgraded power supply for an Enlight 7180 case. This was the closest in dimensions that I had found. The measurements I made when I received it are: H 55.5mm/2.2" (not including the fan protrusion which adds 8mm/0.3") W 83.6mm/3.25" and L 145.5mm/5.75" This agrees with the dimens...
Cons: I had expected the unit to be longer which would require cutting off a tab but it is also not as high and not as wide. That is why actual dimensions were important to me. A number of the power supplies listed as TFX and SFX have non standard shapes and sizes and some of the dimensions given don't...
OK PSU as far as providing power and connectors, ...
Orin Lowe, Amazon
19 February 2016
Summary: OK PSU as far as providing power and connectors, but mounting is on the end (see picture) not the side. Gave me a mounting problem with my Sentey slim case. That seems a departure from micro-ATX design. Replaced it with a side mounter.
replacement for PSU in R379-M case and works as expected
Michael Hseih, Amazon
6 January 2016
Summary: Bought this specifically to replace the power supply that came with the Rosewell R379-M HTPC case. The original power supply one day burnt out after about 3 years of use. In the PC setup I had 1 SSD, 1 3.5" HDD, a bluray burner (barely used) and a separate HD6670 low profile graphics card.
Summary: The R379 Is still a good case, so I decided to replace the PS rather than scrap it. Considered fitting a larger TFX style unit into it, but doing so would block the only case fan.
Pros: The original one that came in my case lasted through 6 years of nearly continuous use. It runs quietly, can only hear it if I shut off the other fans in the case. The new one has one more SATA drive connector and one less molex, and it still has a 3.5 floppy drive connector. Are those still used ...
Fits perfect, and had all the connections I needed
12 September 2015
Summary: Fits perfect, and had all the connections I needed. Replacing a burnt out 225 Watt supply. I can't give five stars because I have only had it for a few weeks and am unable to speak to its longevity. Its quiet and does what I need it to do for a decent price.