Summary: Was very skeptical about this cooler at first. If it falls off, its heavy enough to break something. There are two factors that kept this cooler working for me. 1. I took my time installing, and made certain it was firmly in place without ripping the set screws out. 2. Keeping the inside of the inside of the computer as dust free as possible I removed this fan Aug 2, 2014 and after almost 2 years it was dust free.
Summary: Works good, not too noisy. Make sure you have the room for it, I'm pretty cramped with the chiltec right next to it. Update - Not quite a year later and one of the fans is making a horrible rattling noise.
Summary: Easy to install & remove for cleaning. Feature bonus adjustable height. Azza case, mobo Asus P6X58D Primium with Triple Channel Viper Patriot DDR3 PC3-12800 1600MHz 6x2GB Ram sticks. keeps my Triple Channel RAM an ICY 23c :P under full load, while OC'd by 5% runs 28c/88F!
Summary: Remove the stickers from the from of fans. Mine made horrible noises for a year or more intermittently till I found this out. I have had no problems since. Securely fasten mounts to memory clips to avoid vibration. It does seem to mess with stock cpu cooler air flow but no more then a north bridge fan. After removing stickers from fans, Very happy with product.
Summary: they do what their supposed to: keep your ram cool. however, they are a little loud. install was relatively simple, but i was required to drill holes and adjust the mounting height (my ram, the OCZ reaper has large heat pipes)
Summary: These fans are effective in moving a lot of air directly onto the memory bank. Although I did find it to be louder than expected. If your motherboard has features to control the speed of this depending on memory temperature, then it will run at lower speeds and its not so loud. Luckily I have such features so I'm satisfied running it at about 50% power.
Excerpt: Incredibly well built for the income, quiet adequate, perfect for XMS Dominator series Corsair RAM Even though the parts utilized to safe this to the RAM is high quality and is most absolutely secured to the fan unit, there just doesn't look to be anyway to really lock this unit down to the RAM itself with the offered hardware.
Excerpt: Cools RAMAppears pretty awesome.Produced by Corsair. I don't consider it fits on an Asus or ASRock P67 mobo as they don't have clips on both sides. Id reccomend it if you dont have an asus or asrock P67 board.