Excerpt: I got this from my friend after he used it for a couple of months in the build I made him. He originally got it for $50 at Microcenter which was a fantastic deal. I used this as an upgrade from my 212+ as my temps were 70-80s under normal load on my 2500k. WIth this cooler, even used, it's an excellent cooler. My load temps dropped 20-30 degrees under load which is phenomenal. Even at 5GHz, my temps only go to mid 80's under extended prime95.
Excerpt: The PSU and the hard drives sit in their own compartment at the bottom isolated from the rest of the case. The case has two 120mm intake fans both located at the front of the case. 2 x 120mm exhaust (top and rear). The 920 Kuhler was mounted in the place of the rear exhaust fan, exhausting air out of the case as recommended by Antec. I ran multiple tests with different sets of fans, 2x stock Antec fans and 2x Corsair SP120 HP in a push/ pull config.
Excerpt: This is a solid entry level cooler made by Asetek and distributed by Antec. The Phenom rig I have it on is now one year old, and is overclocked to 3.5Ghz (I didn't bother trying for a higher overclock given that the Gigabyte GA-970A-D3 mainboard in my rig doesn't have a heat sink on the VRM - a mobo not exactly designed with overclocking in mind).
Excerpt: I bought these excellent coolers for my new build. I installed the first one on my i5 3570K and silenced the fan. Then I ran Prime95 and the temps didn't go over 58 degrees Celsius...and it was very quiet.
Excerpt: Well, after looking for a flaw, I have given up and just am completely impressed with it. I was against water cooling of any type for a long time and finally started to look into them. This one to me is for sure one of the best. I didn't want a 240 rad cluttering up my system and this double thick 120 was perfect for me.
Excerpt: I wanted to eliminate the big bulky air cooler from my case and get my first touches of water cooling. These all in one coolers aren't really much more to deal with then a big air cooler though. I found it easier because the big air coolers get in the way during installation.
Excerpt: I purchased this as my first water cooling unit and i have to say it has been great and reliable i have had no issues and have been able to overclock my cpu to its max settings with no heat issues. As it is only a single rad unit it makes it easy to fit in almost any case that you may have. It has a smal cpu heat sink which makes lots of breathing room in your case for air flow for other parts.