Summary: DQ77KB is the most full-featured Thin Mini ITX motherboard for Ivy Bridge procs and since none exist for Haswells as of now, this and one from Gigabyte are pretty much the only choices if you want to build your own AIO, or simply an ultra small PC (for example using Silverstone Petit PT13B).
Summary: I used to have 20 1u rack mount servers. These servers drew over 30 amps, and were loud and a pain in the rear to service. I replaced all those with 10 of these. I hang these vertically inside the rack without any chassis. The only moving part is the CPU fan, which does not spin furiously. A bit of velcro holds the SSDs. I use less than 10 amps now and do not need the rack internet controlled power switch or the internet controlled KVM anymore.
Summary: It's running debian GNU/Linux at 9 watts and only reaches 30W on full load when compiling using all cores. Case: Akasa Euler (don't install backplate) PSU: Cooler Master NA 90W (black plug) CPU: Intel i3-3220T RAM: 16GB Corsair Vengeance SSD: Intel X25-M 160GB
Summary: I got this mobo, i5-3330, 1.35V RAM. With a dell laptop power adapter and laptop hard drives(spun down) it idles at 10W (screen unplugged)! I was pretty happy with 17W idle, but after some bios + software tweaking idle power usage dropped to 10W. This mobo allows one to build PCs that are more efficient than various Atom, E350, etc options. With a Cooler Master Hyper TX3 - CPU Cooler with 3 Direct Contact Heat Pipes (RR-910-HTX3-G1) I can't hear the system run.
Summary: To all the people who posted negative reviews, maybe they should do their homework first instead of complaining about the product. I put mine together and it's running awesome, super slim profile, completely silent, low power, and really powerful. The case is only 2 inches tall! And The PSU is only 90W. Seems like the part hardest to find is the PSU.
Summary: Using in the In-Win K-1 case with Asus 22" monitor. Cpu is i-3 2125 with Intel low-prifile cooler and have 16Gb DDR 3 1600 , 204 pin RAM; Corsair Force GT 120gb SSD with Win 7. This rocks!! Oh and PSU is a 180 watt brick. I am SO glad that I read what this board requires and what it is capable of before just buying it.
Summary: This was the motherboard chosen for an I3 IvyBridge low power processor as part of a home build fanless pc. The motherboard does exactly what I had hoped for. Fitting the processor took less than a minute though a little more time was necessary to apply the thermal interface material and heatsink.