Aside from that I would have liked at least one more fan port on the board
Cri$co Di$co, Amazon
4 weeks ago
Summary: I had a brief issue where the ethernet port stopped working, after a couple reboots and reloading the drivers it decided to work again. Aside from that I would have liked at least one more fan port on the board.
A good board potentially, but problem with CPU fan speed controller
Eric L., Amazon
26 July 2014
Summary: I built a DIY NAS that only accepts m-itx motherboards and a nice feature of this one is the six internal SATA 6 ports. Unfortunately, I had to ultimately return this board because it's CPU fan controller, when set for quiet mode in the BIOS proved to be anything but. It would periodically stop the CPU fan from spinning completely for a minute or two, then quickly ramp it up to full, very noisy speed for another minute or two and repeat this cycle indefinitely.
Summary: Great compact PCB for gaming. Remember the more expensive boards are only necessary if you're into overclocking. With a small footprint and in small case I decided not to overclock as today's games barely stress out an Intel CPU.
Summary: This is the heart of a homebuilt NAS. It has a UEFI (newer replacement for BIOS) which has all sorts of settings not found in the older BIOS. The only glitch I can allude to is that I haven't figured out how to make it reboot automatically from a USB thumb drive without manual intervention; but I suspect that is my fault, not that of the board. It has been running 24/7 for several months with no hiccups. Board runs cool with Intel I3-4130 and stock fan.
Summary: has been working great!! bios updated and running properly. everything is up and running smooth. no complaints. works great with my GTX760 SC 2gb Graphics card and fit Perfectly in my Antec isk600 Case. withour a problem.