www.testfreaks.com

Reviews, reviews, reviews...

Dummy.190587

Tannoy POWERVS 15BP

A switch on the rear panel of the full range models allows sel Read more

Best Price at Amazon

Specifications

Feature
Value
Comment
POWERVS 15BP
System Type
Subwoofer-Bandpass
Frequency Response (-3dB) (1)
47Hz - 80Hz
Frequency Response (-3dB) (1)
47Hz - 110Hz
Frequency Response (-10dB) (1)
37Hz - 80Hz
Frequency Response (-10dB) (1)
37Hz - 110Hz
Rated Maximum SPL (2)
Average: 124dB Peak: 130dB
Driver Complement
380mm (15.00”) High excursion bass driver
Crossover
User selectable LPF
Distortion
10% Full Power (15.5V) 2nd Harmonic 40Hz: 0.65% 100kHz: 3.05% 3rd Harmonic 40Hz: 0.67% 100kHz: 0.70% 1% Full Power (4.9V) 2nd Harmonic 40Hz: 0.13% 100kHz: 0.76% 3rd Harmonic 40Hz: 0.30% 100kHz: 0.24%
Construction
Enclosure
100 litre internally braced 15mm (0.62”) birch plywood bandpass enclosure
Finish
Textured black or white paint with custom colours on request
Connectors
1 x female XLR (input) 1 male XLR (link) 1 x Neutrik Powercon
Controls & Indicators
Level control
Fittings
8 x M10 flying inserts
Dimensions (HxWxD)
665 x 440 x 440mm (26.18 x 17.32 x 17.32”)
Weight
30kg (66lbs)
Electronics
Maximum signal input for clip
Input attenuator at minimum: +18dBu
Output noise
-105dB unweighted, referenced to maximum output (22kHz bandwidth)
Efficiency
>90% typically
Damping Factor
400 ref 8 Ohms
Distortion
<0.05% @ 1kHz -3dB output (22kHz bandwidth)
Input Impedance
5.6kOhm unbalanced 11.2kOhm  balanced
Protection systems
Over Current
Excessive over current causes shutdown
Temperature
Limiters applied
Brownout
Automatic protection & recovery
Mains
Inrush current limiting
Indicators
1x Limit LED 1x Signal LED 1x Power LED
Number of channels
One
System Type
Class D
PSU Specifications
Input Connector
Locking Neutrik Powercon
Voltage Selection
Automatic (115 / 230V, 45 - 65Hz)
Type
High current, high frequency switch mode
Efficiency
>90% typical
Input voltage
100v / 115v / 230v nominal +/-10%
Mains fuse
External
Fuse type
T10AT
Other features
Automatic soft start
Release Date
First seen
18 May 2009