Specifications

Feature	Value	Comment
SYSTEM
Frequency Response (-3dB) (1)	75Hz - 22kHz
Frequency Range (-10dB) (1)	55Hz - 24kHz
System Sensitivity (1W @1m) (2)	90dB (1W = 2.45V for 6 Ohms)
Nominal Coverage Angle	90 degrees conical
Driver Complement	High Frequency:ICT™ Low Frequency: 165mm (6.50") mineral loaded polypropylene
Crossover	7kHz Inductively coupled
Directivity Factor (Q)	10.5 averaged 1kHz to 10kHz
Directivity Index (DI)	8.4 averaged 1kHz to 10kHz
Rated Maximum SPL	Average: 107dB Peak: 113dB
Power Handling (3)	Average: 60W Programme: 120W Peak: 240W
Recommended Amplifier Power	120W @ 6 Ohms
Nominal Impedance	6 Ohms
Di6t only - Transformer Taps (top rotary switch)	70V: 60W / 30W/15W / 7.5W / 3 / OFF & low impedance operation 100V: 60W / 30W / 15W / 7.5W / OFF & low impedance operation
CONSTRUCTION
Enclosure	High Impact Polystyrene (HIPS) rated IP64 to EN60529 (IEC529)
Grille	Steel, with weather resistant coating
Finish	Textured black or white paint (custom trim colours can be supplied pre-fitted to special order - minimum order quantity applies)
Connectors	Euroblock type removable locking connector with screw terminals with "loop through" facility
Fittings	1 x K-Ball™ Bracket socket 2 x M8 yoke bracket inserts
Supplied Accessories	Yoke bracket
Optional Accessories	Pole mount adaptor K-Ball™ pre-wired multi angle bracket
Dimensions	357.5 x 230 x 223.2mm (14.08 x 9.05 x 8.79”)
NET Weight	5.0kg (11.02lbs)
Release Date
First seen	9 May 2008

Tannoy DI6