www.testfreaks.com

Reviews, reviews, reviews...

Dummy.190587

Genelec 1037A

Genelec 1037A Tri-amplified Monitoring System 1037A Applications Read more

Best Price at Amazon

Specifications

Feature
Value
Comment
Lower cut-off frequency, -3 dB:
< 38 Hz
Upper cut-off frequency, -3 dB:
> 22 kHz
Free field frequency response of system
39 Hz - 21 kHz (± 2.5 dB)
Maximum short term sine wave acoustic output on axis in   half space, averaged from 100 Hz to 3 kHz
@ 1 m > 114 dB SPL
Maximum long term RMS acoustic output in same conditions with IEC-weighted noise (limited by driver unit protection circuit)
@ 1 m > 106 dB SPL
Maximum peak acoustic output per pair on top of console, @ 1.7 m from the engineer with music material
> 125 dB
Self generated noise level in free field @ 1 m on axis
< 15 dB (A weighted)
Harmonic distortion at 95 dB SPL at 1m on axis f < 100 Hz f > 100 Hz
< 3 % < 0.5 %
Drivers Bass Mid Treble
305 mm (12") cone 130 mm (5") cone 25 mm (1") metal dome
Weight:
35 kg (77 lb)
Dimensions Width Height Depth
680 mm (26 3/4") 400 mm (15 3/4") 380 mm (15")
Bass amplifier output power with a 6 ohm load
Short term 160 W
Midrange amplifier output power with a 4 ohm load
Short term 160 W
Treble amplifier output power with a 8 ohm load
Short term 120 W
Slew rate
80 V /µs
Amplifier system distortion at nominal output THD SMPTE-IM CCIF-IM DIM100
< 0,05 % < 0,05 % < 0,05 % < 0,05 %
Signal to Noise ratio, referred to full output bass midrange treble
> 100 dB > 100 dB > 100 dB
Mains voltage
100/200 V or 115/230 V
Voltage operation range at 230V setting
207 - 253 (± 10 %)
Power consumption, idle full output
50 W 300 W
Input connector: XLR female
pin1 gnd pin 2+ pin 3-
Input impedance
10 kOhm
Input level for 100 dB SPL output @1 m
variable from +6 to -6 dBu
Input level for maximum short term output of 114 dB SPL @1 m
variable from +20 to +8 dBu
Subsonic filter below 35 Hz:
18 dB / octave
Ultrasonic filter above 25 kHz
12 dB / octave
Crossover frequency bass / mid mid / treble
420 Hz 3,2 kHz
Crossover acoustical slopes
18 - 24 dB / octave
Crossover level control operation range in 1 dB steps bass middle treble
from 0 dB to -6 dB from 0 dB to -6 dB from 0 dB to -6 dB
Bass roll-off conrol in 2 dB steps
from 0 dB to -8 dB @ 38 Hz
Bass tilt control in 2 dB steps:
from 0 dB to -8 dB @ 50 Hz
Release Date
First seen
9 May 2008