www.testfreaks.com

Reviews, reviews, reviews...

Dummy.190587

Genelec 1035A

Genelec 1035A Control Room Monitor 1035A Applications Main monit Read more

Best Price at Amazon

Specifications

Feature
Value
Comment
Lower cut-off frequency, -3 dB:
< 30 Hz
Upper cut-off frequency, -3 dB:
> 22 kHz
Free field frequency response tolerance of system
± 3 dB
continuous (thermally limited)
> 126 dB SPL
short-term (200 ms, amplifier output voltage limited)
> 131 dB SPL
Maximum continuous RMS acoustic output in same conditions with IEC-weighted noise
> 123 dB SPL
Maximum peak acoustic output per pair at engineer's site, speakers @ 2 m from the engineer with music material
> 136 dB
Self generated noise level in free field @ 2m on axis
< 20 dB (A weighted)
Harmonic distortion at 105 dB SPL at 1m on axis f < 200 Hz 200 Hz < f < 4 kHz f > 4kHz
< 1% < 1 % < 3 %
Drivers Bass Mid Treble
2 x 15" cone (385 mm) 2 x 5" cone (120 mm) 1" throat compression driver
Weight: Speaker Amplifier
313 lb. (142 kg) 156 lb. (71 kg)
Dimensions, Speaker: Width Height Depth
32 1/4" (820 mm) 43 1/2" (1105 mm) 30 1/2" (775 mm)
Dimensions, Amplifier: Width Height Depth
19" (483 mm) 29 3/4" (755 mm) 14 9/16" (370 mm)
Bass amplifier output power at 8 ohm load: continuous momentary
2 x 400 W 2 x 1100 W
Mid amplifier output power at 4 ohm load: continuous momentary
100 W 600 W
Treble amplifier output power at 8 ohm load: continuous momentary
13W 300 W
Slew rate
100 V /µs
Amplifier system distortion at nominal output THD SMPTE-IM CCIF-IM DIM100
< 0,05 % < 0,1 % < 0,1 % < 0,1 %
Signal to Noise ratio, from shorted system input to channel output, referred to full output bass midrange treble
101 dB 105 dB 106 dB
Mains voltage
100/110/200/220/240 VAC
Voltage operation range
± 5 %
Power consumption, idle full output
150 VA 3500 VA
Input connector: XLR female
pin 2+ pin 3-
Input impedance
10 k balanced
Continuously variable input level for maximum output: 10 dB attenuation
from +14 to +24 dBu
Subsonic filter:
down 12 dB @12 Hz re 100 Hz level
Ultrasonic filter
down 12 dB@ 50 kHz re 10 kHz level
Crossover frequency bass / midrange midrange / treble
400 Hz 3,5 kHz
Crossover acoustical slopes
> 24 dB / octave
Tone control operation range in 1 dB steps bass middle treble
from 0 dB to -6 dB from 0 dB to -6 dB from 0 dB to -6 dB
Bass roll-off filter in 2 dB steps:
from -6 dB to 0 dB @ 30 Hz
Bass tilt control in 2 dB steps:
from 0 dB to -6 dB @ 50 Hz
Release Date
First seen
9 May 2008