www.testfreaks.com

Reviews, reviews, reviews...

Genelec 1034A

Genelec 1034A

Genelec 1034A Control Room Monitor 1034A Applications Main monit Read more

Best Price at Amazon

Specifications

Feature
Value
Comment
Lower cut-off frequency, -3 dB:
< 35 Hz
Upper cut-off frequency, -3 dB:
> 22 kHz
Free field frequency response tolerance of system
± 3 dB
continuous (thermally limited)
> 120 dB SPL
short-term (200 ms, amplifier output voltage limited)
> 125 dB SPL
Maximum continuous RMS acoustic output in same conditions with IEC-weighted noise
> 121 dB SPL
Maximum peak acoustic output per pair at engineer's site, speakers @ 2 m from the engineer with music material
> 130 dB
Self generated noise level in free field @ 2m on axis
< 20 dB (A weighted)
Harmonic distortion at 100 dB SPL at 1m on axis f < 200 Hz 200 Hz < f < 4 kHz f > 4kHz
< 1 % < 1 % < 2 %
Drivers Bass Mid Treble
2 x 12" cone (300 mm) 5" cone (120 mm) 1" throat compression driver
Weight: Speaker Amplifier
249 lb. (113 kg) 156 lb. (71 kg)
Dimensions, Speaker: Width Height Depth
36 1/4" (920 mm) 27" (685 mm) 21 5/8" (550 mm)
Dimensions, Amplifier: Width Height Depth
19" (483 mm) 29 3/4" (755 mm) 14 9/16" (370 mm)
Bass amplifier output power at 4 ohm load: continuous momentary
2 x 300 W 2 x 600 W
Mid amplifier output power at 8 ohm load: continuous momentary
2 x 50 W 2 x 300 W
Treble amplifier output power at 8 ohm load: continuous momentary
2 x 13W 2 x 300 W
Slew rate
100 V /µs
Amplifier system distortion at nominal output THD SMTE-IM CCIF-IM DIM100
< 0,05 % < 0,1 % < 0,1 % < 0,1 %
Signal to Noise ratio, from shorted system input to channel output, referred to full output bass midrange treble
101 dB 105 dB 106 dB
Mains voltage
100/110/200/220/240 VAC
Voltage operation range
± 5 %
Power consumption, idle full output
150 VA 3500 VA
Input connector: XLR female
pin 2+ pin 3-
Input impedance
10 kOhm balanced
Continuously variable input level for maximum output: @10 dB attenuation @0 dB attenuattion
from +8 to +18 dBu from -2 to + 8 dBu
Subsonic filter:
down 12 dB @18 Hz re 100 Hz level
Ultrasonic filter
down 12 dB@ 50 kHz re 10 kHz
Crossover frequency bass / midrange midrange / treble
400 Hz 3,5 kHz
Tone control operation range 1 dB steps bass middle treble
from 0 dB to -6 dB from 0 dB to -6 dB from 0 dB to -6 dB
Bass roll-off filter in 2 dB steps:
from -6 dB to 0 dB @ 35 Hz
Bass tilt control in 2 dB steps:
from 0 dB to -6 dB @ 50 Hz
Release Date
First seen
9 May 2008