www.testfreaks.com

Reviews, reviews, reviews...

Dummy.190587

Genelec 1033A

Genelec 1033A Control Room Monitor 1033A Applications main monit Read more

Best Price at Amazon

Specifications

Feature
Value
Comment
Lower cut-off frequency, -3 dB:
< 37 Hz
Upper cut-off frequency, -3 dB:
> 22 kHz
Free field frequency response tolerance of system
± 3 dB
continuous (thermally limited)
> 118 dB SPL
short-term (200 ms, amplifier output voltage limited)
> 123 dB SPL
Maximum continuous RMS acoustic output in same condition with IEC-weighted noise
> 118 dB SPL
Maximum peak acoustic output per pair at engineer's site, speakers @ 2 m from the engineer with music material
> 125 dB
Self generated noise level in free field @ 2m on axis
< 15 dB (A weighted)
Harmonic distortion at 100 dB SPL at 1m on axis f < 200 Hz f > 200 Hz
< 2 % < 1 %
Drivers Bass Mid Treble
2 x 10" cone (250 mm) 5" cone (120 mm) 1" dome (25 mm)
Weight: Speaker Amplifier
129 lb. (59 kg) 120 lb. (55 kg)
Dimensions, Speaker: Width Height Depth
27 1/2" (700 mm) 21 5/8" (550 mm) 17 3/4" (450 mm)
Dimensions, Amplifier: Width Height Depth
19" (483 mm) 29 3/4" (755 mm) 14 9/16" (370 mm)
Bass amplifier output power at 4 ohm load: momentary
2 x 500 W
Mid amplifier output power at 8 ohm load: momentary
2 x 270 W
Treble amplifier output power at 8 ohm load: momentary
2 x 270 W
Protection levels: Bass Mid Treble
25 V RMS 20 V RMS 8 V RMS
Slew rate
100 V /µs
Amplifier system distortion at nominal output THD SMTE-IM CCIF-IM DIM100
< 0,05 % < 0,1 % < 0,1 % < 0,1 %
Signal to Noise ratio, from shorted system input to channel output, referred to full output bass midrange treble
101 dB 105 dB 106 dB
Mains voltage
100/110/200/220/240 VAC
Voltage operation tolerance
± 5 %
Power consumption, idle full output
150 VA 2000 VA
Input connector: XLR female
pin 2+ pin 3-
Input impedance
10 kOhm balanced
Continuously variable input level for maximum output: @10 dB attenuation @0 dB attenuattion
from +8 to +18 dBu from -2 to + 8 dBu
Subsonic filter:
down 12 dB @18 Hz re 100 Hz level
Ultrasonic filter
down 12 dB@ 50 kHz re 10 kHz
Crossover frequency bass / midrange midrange / treble
410 Hz 3,5 kHz
Tone control operation range 1 dB steps bass middle treble
from 0 dB to -6 dB from 0 dB to -6 dB from 0 dB to -6 dB
Bass roll-off filter in 2 dB steps:
from -6 dB to 0 dB @ 35 Hz
Bass tilt control in 2 dB steps:
from 0 dB to -6 dB @ 50 Hz
Release Date
First seen
9 May 2008