www.testfreaks.com

Reviews, reviews, reviews...

Dummy.190587

Genelec 1024C

Genelec 1024C Monitoring Speaker 1024C Applications recording st Read more

Best Price at Amazon

Specifications

Feature
Value
Comment
Lower cut-off frequency, -3 dB:
< 32 Hz
Upper cut-off frequency, -3 dB:
> 20 kHz
Free field frequency response tolerance of system
± 3 dB
Maximum continuous sine wave acoustic output @ 1m on axis in half space
> 116 dB
Maximum continuous RMS acoustic output in same conditions with IEC-weighted noise:
> 116 dB
Maximum peak acoustic output per pair at engineers' site, speakers @ 2 m from the engineer, with music material
> 122 dB
Self generated noise level in free field @ 1m on axis
< 15 dB (A weighted)
Harmonic distortion at 100 dB SPL @ 1m on axis f < 200 Hz f > 200 Hz
< 3 % < 1 %
Drivers Bass Mid Treble
15" cone (385 mm) 5" cone (120 mm) 1 1/8" dome (28 mm)
Weight
150 lb (68 kg)
Dimensions: Height Width Depth
19 1/2" (495 mm) 35 1/2" (900 mm) 18 1/4" (464 mm)
Bass amplifier output power at 4 ohm load: continuous momentary
350 W 490 W
Midrange amplifier output power at 8 ohm load: continuous momentary
50 W 250 W
Treble amplifier output power at 8 ohm load: continuous momentary
8 W 250 W
Slew rate
100 V /µs
Amplifier system distortion at nominal output THD SMPTE-IM CCIF-IM DIM100
< 0,05 % < 0,1 % < 0,1 % < 0,1 %
Signal to Noise ratio, from shorted system input to channel output, referred to full output: bass midrange treble
104 dB 100 dB 94 dB
Mains voltage
100/110/220/240 VAC
Voltage Operation Range
± 10 %
Power consumption, idle full output
50 VA 700 VA
Input connector: XLR female
pin 2 + pin 3 -
Input impedance
10 k balanced
Continuously variable input level for maximum output: @10 dB attenuation @0 dB attenuation
from + 9 dBu to + 19 dBu from -1 dBu to + 9 dBu
Subsonic filter
down 12 dB @ 10 Hz re 100 Hz level
Ultrasonic filter
down 12 dB @ 50 kHz re 10 kHz level
Crossover frequency bass / midrange midrange / treble
400 Hz 3.5 kHz
Tone control operation range in 1 dB steps bass midrange treble
from 0 dB to -6 dB from 0 dB to -6 dB from 0 dB to -6 dB
Bass roll-off filter in a 4 dB step:
from -4 dB to 0 dB @ 32 Hz
Bass tilt control in 2 dB steps:
from 0 dB to -6 dB @ 50 Hz
Release Date
First seen
9 May 2008