www.testfreaks.com

Reviews, reviews, reviews...

Dummy.190587

Genelec 1019A

Genelec 1019A Monitoring Speaker ideal for mobile work ± 3 dB fr Read more

Best Price at Amazon

Specifications

Feature
Value
Comment
Lower cut-off frequency, -3 dB:
< 60 Hz
Upper cut-off frequency, -3 dB:
> 20 kHz
Free field frequency response tolerance of system
± 3 dB
Maximum continuous sine wave acoustic output @ 1m on axis in half space, averaged from 100 Hz to 2 kHz
> 100 dB SPL
Maximum continuous RMS acoustic output in same conditions with IEC-weighted noise:
> 100 dB SPL
Maximum peak acoustic output per pair on top of a console, 1 m from the engineer, with music material
> 115 dB
Self generated noise level in free field @ 1m on axis
< 10 dB
Harmonic distortion at 85 dB SPL @ 1m on axis f < 300 Hz f > 300 Hz
< 3 % < 1 %
Drivers Bass Treble
5" cone (125 mm) 13/16" soft dome (21 mm)
Weight
14.3 lb (6.5 kg)
Dimensions: Height Width Depth
12" (305 mm) 8 7/8" (225 mm) 9 5/8"(245 mm)
Bass amplifier output power at 4 ohm load: continuous momentary
22 W 35 W
Treble amplifier output power at 8 ohm load: continuous momentary
6 W 20 W
Slew rate
10 V /µs
Amplifier system distortion at nominal output THD SMPTE-IM CCIF-IM DIM100
< 0,2 % < 0,2 % < 0,2 % < 0,2 %
Signal to Noise ratio, from shorted system input to channel output, referred to full output: bass treble
83 dB 87 dB
Mains voltage
110/220/240 VAC
Voltage operation Range
± 10 %
Power consumption, idle full output
5 VA 50 VA
Input connector: XLR female
pin 2 + pin 3 -
Input impedance
10 k balanced
Continuously variable input level for maximum output
from + 12 dBu to - 8 dBu
Subsonic filter
down 12 dB @ 25 Hz re 100 Hz level
Ultrasonic filter
down 12 dB @ 50 kHz re 10 kHz level
Crossover frequency
3.5 kHz
Crossover acoustical slopes
> 24 dB / octave
Tone control operation range in 2 dB steps bass treble
from 0 dB to - 8 dB from + 4 dB to - 4 dB
Release Date
First seen
9 May 2008