www.testfreaks.com

Reviews, reviews, reviews...

Dummy.190587

Genelec 1018A

Genelec 1018A Active Speaker 1018A Applications Sound distributi Read more

Best Price at Amazon

Specifications

Feature
Value
Comment
Lower cut-off frequency, -3 dB:
< 80 Hz
Upper cut-off frequency, -3 dB:
> 18 kHz
Free field frequency response tolerance of system
± 4 dB
Maximum continuous sine wave acoustic output @ 1m on axis in a free field from 200 Hz to 2 kHz
> 100 dB SPL
Maximum peak acoustic output per pair on top of a console, 1 m from the engineer with music material
> 112 dB
Self generated noise level in free field @ 1m on axis
< 20 dB (A weighted)
Harmonic distortion at 85 dB SPL @ 1m on axis f < 300 Hz f > 300 Hz
< 3% < 1%
Horizontal treble radiation loss at 30° off axis f = 10 kHz f = 15 kHz
< 4 dB < 5 dB
Drivers Bass Treble
4" cone (100 mm) 2" cone (50 mm)
Weight
7.7 lb (3,5 kg)
Dimensions: Width Height Depth
5 7/8" (150 mm) 10 1/4" (260 mm) 6 1/4" (160 mm)
Bass amplifier output power at 8 ohm load continuous momentary
19 W 30 W
Treble amplifier output power at 8 ohm load continuous momentary
5 W 30 W
Slew rate
15 V /µs
Amplifier system distortion at nominal output THD SMPTE-IM CCIF-IM DIM100
< 0,2% < 0,2% < 0,2% < 0,2%
Signal to Noise ratio, from shorted system input to channel output, referred to full output Bass Treble
78 dB 90 dB
Mains voltage
110/220/240 VAC
Voltage Operation Range
± 10%
Power consumption, idle full output
5 VA 50 VA
Input connector: XLR female
pin 2+ pin 3-
Input impedance
10 k balanced
Max input level
+23 dBu
Output connector in parallel with input: XLR male
pin 2+ pin 3-
Output impedance
same as source
Continuously variable input level for maximum output
from + 23 dBu to -4 dBu
Subsonic filter
down 12 dB @ 40 Hz re 150 Hz level
Ultrasonic filter
down 12 dB @ 50 kHz re 10 kHz level
Crossover frequency
3,5 kHz
Crossover acoustical slopes
> 12 dB / octave
Bass cut control operation range
from -6 dB to 0 dB @ 100 Hz
Release Date
First seen
9 May 2008