TestFreaks Forum - Geeky discussions about Consumer Electronics Go to main site

Go Back   TestFreaks Forum - Geeky discussions about Consumer Electronics > Desktop Computers
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 03-30-2008, 11:12 PM
PamJazz PamJazz is offline
I'm new here
 
Join Date: Jan 2008
Posts: 101
Question Startup lagging

I have a problem during startup with Windows XP. When I turn on my pc, the “welcome” screen displays, but after a few seconds, it freezes even there’s a startup tune. I tried to restart my pc and unplug and re-plug the cords and internet but still the same thing happens. Do you have any ideas how I can fix this? I'm using my friend's laptop.

Last edited by PamJazz : 03-30-2008 at 11:14 PM.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #2  
Old 03-30-2008, 11:27 PM
James75 James75 is offline
I'm new here
 
Join Date: Jan 2008
Posts: 24
Default

I suggest that you do a system restore. Before your Windows XP loads, press F8. You can run Windows XP in safe mode. If the problem still persists, try using XP’s auto repair. You will need to have your XP cd for reinstalling the drivers. I recommend this link for detailed explanation. http://www.informationweek.com/share...leID=189400897
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #3  
Old 03-31-2008, 01:35 AM
Dizzy Dizzy is offline
I'm new here
 
Join Date: Jan 2008
Posts: 76
Default

This sounds like an issue with your pc’s BIOS. The BIOS handles the the initial startup of your pc before Windows is even accessed on the hard drive. If you cannot boot into windows, you’ll just have to reinstall the cd. There may be a problem with the connection to the hard drive. If you have tried different hard drives in the same PC, then try swapping out the cable that connects the hard drive to the motherboard. If different cables do not solve the problem, then the problem may lie with the connector on the motherboard. If thats the case, then the entire motherboard will need to be replaced. Try downloading the following CD to run diagnostics on your hard drive. This should provide further information as to what is wrong with your system. Ultimate Boot CD - Overview
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #4  
Old 04-10-2008, 10:48 PM
alphaben alphaben is offline
I'm new here
 
Join Date: Apr 2008
Posts: 53
Default

Error 80 is a type of system error with multiple potential software or hardware causes.
Like what dizzy said, you need to go first into your BIOS and check that the settings it has match your hardware. Refrain from turning OFF your computer when it is in the middle of doing something such as downloading software updates. You are corrupting your system Registry by doing so.

You need to use some type of Registry Checking software because it sounds like your Registry is corrupted as well as possible malware. There are LOTs of Registry Cleaners out there but you need to be careful using them because you can make matters worse by using them to remove items you shouldn't.

Use system recovery console only as a last resort. This will format your drive and start over from scratch. Type MSConfig from the Run command in start menu. There is a key on the MSConfig console called “Launch System Restore”. If you use this option, it will cause you to lose your latest updates you made to your pc. Remember, this is only as a last resort.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


All times are GMT -8. The time now is 10:12 AM.


Search Engine Optimization by vBSEO 3.0.0 RC8