www.testfreaks.com

Reviews, reviews, reviews...

Yamaha-n12.33633677
5.9 out of 10

Yamaha N12

Best Price at Amazon

Specifications

Feature
Value
Comment
Dimensions
Width 515mm (20-1/4")
Height
146mm (5-3/4")
Depth
561mm (22-1/8")
Weight
Weight 14kg (30.9 lbs.)
AD Converter
24 bit linear, Enhanced dual-bit delta-sigma conversion
CH EQ
3 band PEQ ±18 dB, MID frequency range: 100 Hz–10 kHz
High Pass Filter
OFF/80 Hz (–12 dB/oct.)
Sampling Frequency Rate
Internal (44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz) External (44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz (±0.1 %))
Frequency Response
fs = 48 kHz (20 Hz–20 kHz, +1, –3 dB @ +4 dB, into 600 ohms) fs = 96 kHz (20 Hz–40 kHz, +1, –3 dB @ +4 dB, into 600 ohms) CH IN to STEREO OUT
Total Harmonic Distortion
0.003 % or less (1 kHz @ +18 dB, into 600 ohms) GAIN: Minimum
Cross Talk
–86 dB, CH1–8 –80 dB, CH9–12 GAIN: Minimum Adjacent Input
Storage
Floppy Disk Drive No
CD-RW
No
Internal Memory
No
Hard Disk Drive
No
External Drives
No
Optional Memory
No
SmartMedia Slot
No
Expandability
Plug-in Boards No
Connectivity
DC IN DC IN
Headphones
PHONES(TRS phone type, unbalanced)
Foot Switch
FOOT SW
Microphone
INPUT A 1 - 8(XLR type balanced)
MIDI
MIDI IN/OUT
DIGITAL IN
No
AUX OUT
AUX OUT(TRS phone type, balanced)
DIGITAL OUT
No
OPTICAL OUT
No
PHONE OUT
No
TO HOST
No
USB
No
USB TO DEVICE
No
USB TO HOST
No
Others
INPUT B 1 - 8(TRS phone type, balanced),INSERT I/O 1 - 8(TRS phone type, unbalanced),INPUT9 - 12(Phone type, unbalanced/RCA pin type, unbalanced),2TR IN(RCA pin type, unbalanced),ST OUT(TRS phone type, balanced/RCA pin type, unbalanced),C-R OUT(TRS phone type, balanced),DAW I/O
Others
DVD-ROM (CUBASE AI4),Owner's Manual,TOOLS for n/CUBASE AI4 Installation Guide
Power Consumption
51W
Phantom Power
+48 V DC (Only for INPUT A, turn on/off every 4 channels)
Windows
Others *** The computer must have an IEEE 1394 (FireWire or i.LINK, etc.) connector for IEEE1394 connection. If there is no connector, please install an IEEE1394 interfacecard (PCI or PC). When using a laptop or notebook computer, a built-in IEEE1394 terminal may not be available. In this case, install an appropriate PC interface card. 1394 Chip Set Compatible with n12/n8 IEEE1394 connection with "TOOLS for n" - AGERE FW323-05 - AGERE FW323-06 - TI TSB12LV23 + PHY - TI TSB12LV26 + TSB41AB03 - TI TSB43AB22/A - TI TSB43AB23 - VIA VT6306 *ATTENTION The manufacturer may alter the above mentioned Chip Set without notice. Depending on the change, there's a possibility of it not working properly with this driver. 1394 Chip Set NOT Compatible with n12/n8 IEEE1394 connection with "TOOLS for n" - NEC D72873GC - NEC D72874GC - NEC uPD72874
Windows
CPU Intel Core or Pentium or Celeron family processor, 1.4 GHz or better with an S400 (400Mbps) IEEE1394 (FireWire) or i.Link terminal (for IEEE1394 connection).*** see column "Others"
Support OS
Mac OS X 10.4 or higher
Support OS
XP Professional/XP Home Edition SP2
Memory
512 MB or more
Memory
512 MB or more
Macintosh
CPU Power Mac G4 1 GHz or Core Solo 1.5 GHz or better with an S400 (400Mbps) FireWire.
CD-ROM
CD-ROM (TOOLS for n)
Included Accessories
Power Adaptor AC power adaptor(PA-30)
Cable
IEEE1394 cable
Release Date
First seen
19 August 2007