Specifications

Feature	Value	Comment
Total Harmonic Distortion	Less than 0.1 % (THD+N) 20 Hz - 20 kHz @ +14 dBu (ST OUT)
Frequency Response	0, +1, -3 dB 20 Hz - 20 kHz @ +4 dBu (ST OUT)
Hum & Noise	-128 dBu Equivalent Input Noise/ -98 dBu Residual Output Noise 20 Hz - 20 kHz, Rs = 150 Ω, Input Gain = Maximum
Input Connectors	MIC: 6, LINE: 4 mono + 4 stereo, CH INSERT: 4, AUX RTN: 1 stereo, 2TR IN: 1
Output Connectors	ST: 2, AUX SEND: 1, EFFECT SEND: 1, CH INSERT: 4, REC: 1 stereo, MONITOR: 1 stereo, GROUP: 2 Phone: 1
Crosstalk	-70 dB @ 1 kHz
Phantom Power	+ 48 V
Input HPF	CH 1-4, CH 5/6-7/8, 80Hz, 12dB/oct
CH EQ (MONO) ±15 dB (Max.)	High 10 k Hz: shelving
Mid	2.5 k Hz: peaking
Mid
Low	100 Hz: shelving
Low	100 Hz: shelving
CH EQ (STEREO) ±15 dB (Max.)	High 10 k Hz: shelving
Compressor (COMP)	Control x 1 (Gain/Threshold/Ratio), CH 1-4
Internal Digital Effect	16 PROGRAM, PARAMETER control Foot Switch (Digital Effect, on/off)
LED Level Meter / Pre Monitor Level	2 x 12 points LED meter (PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB) PEAK lights if the signal comes within 3 dB of the clipping level.
Peak Indicator	Red LED turns on when post EQ (ST CH: or post Mic HA) signal reaches -3dB below clipping (17dBu).
Power Supply Adapter	PA-20: AC 35VCT, 0.94A, Cable Length = 3.6m
Power Consumption	30 W
Dimensions (W x H x D)	346.2 mm x 86.1 mm x 436.6 mm
Net Weight	3.2 kg
Options	Foot Switch (FC-5)
Release Date
First seen	13 April 2009

Yamaha MG 124 CX