www.testfreaks.com

Reviews, reviews, reviews...

Dummy.190587
6.8* out of 10

Vestax PMC-580 Pro

Best Price at Amazon

Specifications

Feature
Value
Comment
manufacturer_description
(DOWNLOAD PDF MANUAL_11.8MB) <MASTER EFFECTER / 11 EFFECTS> -AUTO LPF (Low Pass Filter) -AUTO BPF (Band Pass Filter) -AUTO HPF (High Pass Filter) -FLANGER -PHASER -DELAY -REVERB -AUTO PAN -PITCH SHIFT -TREMOLO -PANNING DELAY <PGM CH EFFECTER / 6 EFFECTS> -LOOP -DELAY -LOW CUT DELAY -REVERB -FLANGER -FILTER SWEEP Intuitive effect operation The PMC-580Pro�fs effects can be operated with 2 different effect switch modes. <MOMENTARY MODE> Useful for when you want instant effects on short phrases. The effect will be applied to the sound only while the effect button is pushed. <ALTERNATE MODE> Useful for when you want to apply effects in to a long mix. The effect will be applied to the sound once the effect button is pushed, and will continue to be until the effect button is pushed again. BEAT KEY
feature
The PMC-580Pro is loaded with 5 high spec DSP chips. 3 to process effects and 2 for mixing sound signals. The Enhanced Dual Bit method, a high performance chip technology of ASAHIKASE is applied to the AD/DA section of the PMC-580Pro, where sound signals are converted between digital and analog. (48 kHz/ 24bit) The PMC-580Pro is generated by a high capacity institutional power adaptor, which gains the heavy low groove required for supreme CLUB sound. The internal power supply which produces the sound signal circuit runs on +/-18V. With the two combined, +/-24dB of headroom is produced (analog output), creating dynamic sound. HI GAIN TRIM control circuit is a new feature designed to bridge the gap between digital media, MP3s and CD source sound levels.
feature
An EQ/ISOLATOR select switch is located on each program channel to enable DJs to select their preference sound adjustment method in regards of the music they play.
feature
BEAT KEY is a feature which operates simultaneously with the auto BOOM counter and TAP BPM counter. BEAT KEY will control the effects BPM along with the detected BPM of the playing track, selected from: 8, 4, 2, 1, 3/4, 2/3, 1/2, 1/4 and 1/8. BPM controllable effects: <PGM>LOOP / DELAY / LOW cut DELAY / FLANGER <MASTER>AUTO HP, BP, LP / FLANGER / PHASER / DELAY/ AUTO PAN / TREMOLO / PANNING DELAY
feature
The two 44.1k, 48kHz sampling rate digital inputs enable digital connection and provide a sound system with no sound deterioration. Digital music files can be played from computers and tracks can be recorded to computers via USB input/output, a standard feature for digital mixers. (The USB circuitry of the PMC-580Pro utilizes the driver device within the operating system of the computer and does not require any specific driver to be installed)
feature
Smooth 60mm input faders for high precision mixing. The reliable Vestax CF-PCV is applied as the cross fader together with fader curve control, suitable for mixing and scratching. The top panel layout is designed considering the DJ to play intuitively without mixing up the effect section and sound control section during club performance. Large effect knobs for dynamic effect control. Input faders and the cross fader can be easily replaced by detaching the section top panel.
feature
The DX panel, an option item to increase inputs and outputs can be installed to the front panel for DJs who to wish to use DJ software with the PMC-580Pro.
feature
<3 convenient mic effects > PITCH SHIFT Modulates the mic sound within +/-1 octave and changes the voice to a high/low pitch. DISTORTION Deteriorates the mic sound and creates a distortion effect. MIC ECHO Applies an echo effect to the mic sound.
feature
2 Band EQ, STEREO / MONO select switch and CUE / MASTER select on BOOTH OUT and headphones to support the DJ when they�fre in the mix. The MIC section comes with a 2 Band EQ and TALKOVER switch for advanced mic performance. Club standard XLR connection applied to MASTER // BOOTH OUT.
Specification
EFFECT
<PGM> LOOP DELAY LOW CUT DELAY REVERB FLANGER FILTER SWEEP�iHP, LP FILTER�j <MASTER> AUTO LPF AUTO BPF AUTO HPF FLANGER PHASER DELAY REVERB AUTO PAN PITCH SHIFT TREMOLO PANNING DELAY <MIC> PITCH SHIFT DISTORTION MIC ECHO
INPUT / OUTPUT
PHONO input RCA PIN JACK LINE/CD input RCA PIN JACK MIC input COMBO JACK (XLR/PHONE) DIGITAL input RCA PIN JACK RETURN input RCA PIN JACK MASTER output (unbal.) PHONE JACK (bal.) XLR JACK BOOTH output (unbal.) PHONE JACK (bal.) XLR JACK REC1/2(SEND) output RCA PIN JACK DIGITAL output RCA PIN JACK PHONES output PHONE JACK USB input/output B-type USB JACK
GENERAL
Power AC-ADAPTOR / AC-20 Power Consumption- 40 W Weight 8.5 kg Demension 326 (W)x406 (D) x100 (H) Sampling Rate 48kHz Mixer part full digital, 32 bit DSP Effect part full digital, 24 bit DSP CPU 32 bit * 2, 16 bit * 3 ADC 24 bit E-Dual bit DELTA-SIGMA 106dB DAC 24 bit A-Multi bit DELTA-SIGMA 100dB S/N Ratio over 75 dBv (JIS-A) Distortion less than 0.05% Freq response 20Hz - 20kHz �}3dB
LEVEL
<INPUT Level / INPUT Impedance> LINE -10dBv / 18k ohm MIC -50dBv / 5.4k ohm PHONO -45dBv / 45k ohm RETURN 0dBv / 32k ohm OUTPUT Level / Impedance MASTER 0dBv / over 10k ohm (bal.) over 600 ohm BOOTH 0dBv / over 10k ohm (bal.) over 600 ohm REC -10dBv / over 10k ohm SEND 0dBv / over 10k ohm PHONES 190 mW/over 8 ohm/68ohm
CHARACTERISTIC
PGM Equalizer / Isolator <Equalizer> Hi 10kHz �}12dB MID 100 - 10kHz �}12dB LOW 100Hz �}12dB <Isolator> HI 10kHz �}12dB MID 100 - 10kHz �}12dB LOW 100Hz �}12dB <MIC Equalizer> HI 3kHz �}12dB LOW 100Hz �}12dB <BOOTH/PHONES Equalizer> HI 10kHz �}12dB LOW 100Hz �}12dB
OPTION
DX LINE input RCA PIN JACK DX LINE output RCA PIN JACK
Release Date
First seen
11 July 2008