Mr. Robert, all the step are good, are ok, BUT after the last step you indicate, the image do not transmit to the coby DP-151. I use the download image but receive a "download failed" advise. Please tell me what else to do.
key registry to coby dp-15
Download & Install The Photo Viewer Software From this website:
Find your Photo Key Chain version and Download the Driver CD files along with all the latest
The version is listed on the back of the Photo Key Chain as 151SX, DPKEY or 151MP.
To Download & Install the Photo Viewer Software from the
a) Create a folder on your desktop before downloading the file. To create
a folder on your desktop, go to your desktop and RIGHT click on your mouse. A set of
menus will appear. Select “New” and then “Folder” (you will notice a new folder will
appear on your desktop); give it a name, example DP151.
b) Click on this link; http://www.cobyusa.com/?p=prod&prod_num_id=80&pcat_id=3001 and select “Download”
c) Click on your Photo Key Chain Version to start the Download. The version is listed on the
back of the Photo Key Chain (151SX, DPKEY or 151MP).
d) After clicking on your version, you will prompt with a pop-up screen “Do you want to save
or open the file”. Select save.
e) Another screen will prompt you to save the file on your computer. Save the file on your
“Desktop”, in the “DP151” folder and select “Save”.
f) Once the download is completed, go to your desktop. Double-click on the DP151 folder.
g) To install the Photo Viewer software, Double-click on the Setup.exe file. Click NEXT on
h) After the installation. The Photo Viewer Software icon will appear on your desktop.
i) Continue with “STEP- 2”
STEP-2 CONNECT the Key Chain to your computer using the supplied USB cable. Upon
connecting the Key Chain to your computer, the Key Chain will prompt you to set the
device to “USB Charge or USB Update”. Select USB Update by pressing the Right
button and then the Middle button.
STEP-3 RUN the Photo Viewer Software to transfer photos to the Key Chain. Double-click on
the Photo Viewer icon located on your desktop. Once the Photo Viewer opens, it will
give you a message indicating “Upload Completed”. Click OK. (This message
indicated that the Photo Viewer Software has made connection with the Key Chain). If
you have received the “Upload Completed” Message, Skip STEP-4 and continue with
STEP-4 If you have NOT received the “Upload Completed” message, then you are
encountering the below error message:
Can’t Find any Photo Viewer, or
another program owns it. The
program will exit!
*Set the Photo Key Chain to USB update. SEE “STEP- 2”.
*Make sure the USB Cable is connected properly, you should hear a “clicking”
sound when the USB Cable is connected properly in the USB Port.
*The Key Chain should also appear under “MY COMPUTER” as a removable
disk. If not, switch the USB Port or replace the USB Cable.
STEP-5 LOCATE the images on your computer (See Diagram)
STEP-6 HIGHLIGHT the images files that will be transferred to the Key Chain (See
STEP-7 SEND the highlighted images to the Device Panel (See Diagram)
STEP-8 TRANSFER the images from the Collection panel to the Key Chain (See Diagram)
Disconnect the Key Chain from your computer. Everything should work perfectly.