Reviews and Problems with Silverstone Precision PS07
Showing 1-10 of 27
6 August 2014
Summary: I bought the white revision. Great little case over all. No problems for video card size since I have a GTX 770 installed and still have more room on the end so it could have been longer. Fans filters are great, but to me with pets I believe it's more of a requirement to help keep it clean.
Summary: Les caractéristiques intéressantes de ce boitier sont son silence, la bonne ventilation et les filtres pour limiter la poussière d'entrer dans l'ordinateur. Ce qui est le moins bien pensé est sa cage de disques dur amovible (au moins ca d'intéressant) qui est très mal pensée et qui entre en conflit avec le câble d'alimentation ATX 24 pins et le connecteur des ports USB3.0 frontaux de la carte mère.
Pros: Bon manufactirier habituellement., Bonne construction et finition., Les deux ventilateurs frontaux de 120mm inclus sont très silencieux., Assez large pour mettre un refroidisseur de processeur avec fan de 120mm., Beaucoup d'espace pour cacher les câbles à l'arrière de la plaque de montage amovible de la carte mère., Espace pour ventilateur 120mm arrière., Filtres qui sont facilement démontables en facade et sur le dessus.
Cons: Baies de montage de disques durs très mal pensée qui interfère avec le câble d'alimentation ATX 24 pins et le connecteur USB3.0 frontale de la carte mère., Porte en facade pour accèder au filtre des ventilateurs frontaux dificile à ouvrir.
Summary: This is the best mATX case I have worked with for the following reasons; - Lots of space for hard drives with a very well positioned drive cage to keep the drives cool. I have 3x 3.5" hard drives and a 2.5" SSD installed and the highest temperature they have reached is 29°C with a room temperature of 19°C. - Great case design for air cooling. This is especially case if you use tower coolers that can vent air directly out the back of the case.
Summary: This case contains a watercooled and overclocked gaming system which it does a great job of housing, however it might be worth shelling out the extra £20 for its more functional brother the TJ08. Silverstone SST TJ08E USB3 0 PC Case Basically the cases are near identical except for the superior cooling of the TJ08, I have both, and both are watercooled, something that works better on the TJ08 due to its single 140mm intake fan as opposed to the dual 120mm fans of the...
Summary: I did a lot of research on cases and finally went for this one and i'm glad I did. I chose this for it's size and the two silent fans. Which are silent! The case is very well made and has good space inside considering it as matx case. Bare in mind if you are planning on using the 3.5 drive cage for a 3.5 drive you might want to choose low profile ram as I could not fit one in without it touching the ram.
Summary: This case formed part of my first build for about 5 years, so it's interesting to see how things have changed in this time.. I'm building it with an AsRock B75 Pro3-M motherboard: ASRock B75 Pro3-M Motherboard (Socket 1155, Intel B75, DDR3, S-ATA 600, Micro ATX, Instant Boot, AsRock XFast LAN and XFast USB, AsRock APP Charger) which needs to be born in mind with respect to the position of services on the board.
Summary: This was my first venture into the mATX case range, and I am very impressed! The other reviewers have covered most points about this case, so no need for repetition here. My ASRock H77 Pro4-M Motherboard, sits well inside the case, and I might add here that this will not accommodate a full size ATX motherboard.