Summary: I really like this case. Quiet fans, good cooling and plenty of room. Good cabling control. That being said, there are certain features of this case that need to be updated. I used a somewhat oversized video card, and several of the features of the case could not be used. The included video card support will not work on any card that is higher than normal. If it sticks up above the height of the pci bracket (120mm), the included video card support bracket will not work.
Nice big case- not the greatest for water cooling.
5 December 2013
Summary: Great case Needs more room for water cooling. Will fit a 360 rad on top, and with some slight modification a 240 rad on the bottom. If you can get this case cheap and you will not be water cooling it is a great case. Newer Haf stacker looks better and more practical.
Summary: Overall the case was excellent. Its size and layout made system build easy. Superb air flow, system temps never exceed 75 deg C even running benchmark and stress test programs. The only detractor was a slight warp in the case frame that made putting on the top difficult after mounting the optional second fan on an air cooled system.
Great case - Though CM needs better quality control for fans.
30 September 2013
Summary: This is a very well designed case, and with a few fixes it could get 5 stars... First, to be complete, it needs 2 more fans. The rear top fan, and a fan near the middle of the mobo to push air across the vcore. (If you have water cooling this area has low airflow in this large case without an extra fan.
Summary: As others have said this is a great case because it is roomy and cools very well. Also previously noted getting the EVGA 5, 6, or 7 series video cards to fit is a b@#$%h. I have three of these cases and have had the same problem with them all. Why Coolermaster won't fix this is beyond me. However, I have found a work-around that works for me. Having your screws and screw driver at the ready, insert the card. You will hear the retainer snap into place.