Summary: Very cheap product. I got carried away thinking that this is a german product but was completely disappointed to see that it's a cheap chinese case. The side panels bend even when you touch them. The screws have a limited lifetime as they are poorly designed and whenever you take the case apart it's a step closer to destruction. The black paint will go away if you scratch it with your nails. If i wanted a cheap china made case i would go for a chinese case.
Summary: Most PC gamers don't tend to buy the budget cases due to fears to shoddy build quality and just general difficulties in use. I can say that after building a computer inside this case, it has an amazing build quality for the price and whilst it was somewhat difficult to put everything together it was not in anyway frustrating or annoying.
Summary: For the money this case is superb! You get a rear fan and to gratings (side panel and top panel). One thing I liked is the 3.5" external drive bay that i used for my two usb 3.0 adapter. You don't get the tool-free drive bays like some of the more expensive cases, but it's not a downside. The black finish is good quality, it doesn't scratch off! Plenty of room fans! (1 x front, 2 x top panel, 2 x side panel) Plenty of room for cable management!
Summary: This replaced my old plastic case and, being aluminium, is much stronger yet light. It has usb ports on the back (4) and four on the front which makes them more accessible for temporary connections. Bags of room inside too. It comes from a good manufacturer and I recommend it highly.
Summary: I bought this PC case to house the parts for my old computer as they were hanging out of a mini case that wouldn't fit everything in. There is more than enough room inside for a medium to high end build, it may struggle for width if fitting some of the larger CPU heatsinks such as the Noctua NH-D14 and alike but other than that there is plent of room for large GPU's, water cooling blocks/radiators full size motherboards and large PSU's.
Summary: Bought this to replace an antec case which had a faulty power button. The first thing I noticed when I picked up the box is how light it was in comparison to my old antec case. This was all down to the very thin sheets of metal used for its construction. Despite the very thin metal construction, the case is well built and fits together snugly. I had no problem fitting my existing motherboard and PSU in and had no issues with cable routing or sharp edges.
Summary: This case looks very nice has some good features for the price. However, if you have a micro-atx motherboard, I do not recommend this case at all. The case says it supports micro-atx motherboards, but the it is nearly impossible to screw all the standoffs for some reason. You also need a tool to remove the brass standover, a phillips head screw driver wouldn't do the job, so my micro-atx board only had support from 3 screws even though it needed 6.
Summary: Highly recommended for everyone looking for a spacious case that does not take up the whole floor. I am very pleased with the quality and the layout, this "Alpha" version also features lots of breathing holes. Pros and gamers might not be satisfied with a simple case like this, for everyone else, this is the best buy in the price range!