Summary: If you are looking for a decent case with a lot of space in a mid tower this is the case for you. Let me explain a couple features that aren't explained in the details. 1st. This case holds (7) 120 MM fans, which isn't stated anywhere. But knew this prior to buying and bought the 5 extra fans needed. 2nd. Although mentioned, you can actually put even the largest graphics cards in this case.
Summary: Overall this case is great. The only issue I had with it was probably dropped before it got to me. The plastic clips that hold the top of the case together were all broke, but a little craftsmanship and it works fine for me now. The tool-less is kinda a joke. But it looks neat. I didn't use the included fans, but I did buy 7 red LED fans and the case lights up like a christmas tree! Very cool looking and the front panel usb and audio make it worth the money.
Summary: Great case , fits all my 6 hard drives with ease, asus p6x58d . using a Hydor H80. but have to drill the holes, just like dawgbone said, otherwise its good, cable management,i used the tool-less hdd adapters and worked fine ,great air flows, keeping all my system temps at 48F at max load,
Summary: Great air flow! The cable management system behind the left side panel is great. All the cables that operate the top panel and more can be ran through the side panel's cable management system. It also comes with many insert plates which happen to accommodate 2.5'' SSD hard drives. The tooless drive bay clips do not provide the tightest fit but they work fine. However, for my HHD slave drive, I used the mounting screws, no big deal.
Summary: Out of the box it looks great. Unfortunately my troubles started immediately. It says that the case accepts 140mm fans, this is NOT true. It is physically possible to put two 140mm fans up top with monumental effort but the fans will be off center. The tool-less drive bays are a nightmare and I ended up screwing everything in. Finally, cable management is a huge challenge. The case is wide enough, but short back to front.
Summary: First of all, this case just looks amazing when you get it fired up. Lots of air flow options and everything stays nice and cool. It's also well laid out and the hardware is clearly marked. Just be wary of the following: 1. It's not very wide, which can make cable management a bit of a pain. 2. The back exhaust fan holes need to be re-drilled to fit the radiators for many of the newer liquid cooling systems. I got the H60 and the holes are off by about half an inch.
Summary: This arrived yesterday, in perfect time for me to use the long weekend putting together all the parts for my new PC. As I unboxed it I noticed that one of the grommets for the liquid cooling pipes was missing, but I could have lived with that after covering up with some gaffer tape. However, the next thing I found to be missing was the button over the power switch.
E-excellent Box to put the below mentioned into my 13 year old built and designed this configration:)
Kenneth Horne, Amazon
4 April 2014
Summary: This Tower Box is a great for the AMD FX8350 Black Edition 8 Core Processor (4.0/4.2GHz, 8MB Level 3 Cache, Excellent System! Only draw back is the mounting of Cooling radiator could only fit on top section of fan mounts as back mounting is not possible without modifications, "Corsair CW-9060007-WW Hydro Series H60 High Performance 120mm Rad"; Asus GeForce GTX 660 DirectCU II OC Nvidia Graphics Card (2GB GDDR5; Asus M5A99FX PRO R2.0 Motherboard (AMD 990FX, DDR3, S-ATA...