TheGDog from (West) Garden Grove, Sonic Electronix
9 June 2014
Conclusion: Had one of these from a prior project. Using 1/2" MDF Made a box 7 x 14 x 13 (.5417 cu ft) w/ a Precision 2" Flared Port kit cut-down to 10" total assembled length (Tune is about 36-37 Hz) firing out the side. Before closing the box...
Summary: Upon inspection i was very impressed with build quality,magnet structure,and with the tight suspension of this little beast.I have built a .18 cube removable kick pod for each kick panel in my hot rod.i have not wired them up ,but will be running a Sundown audio in 2 ohm mode at about 100-125 rms in...
Pros: Everything,considering their only 135 each.JL is a very well respected sub maker and these are w3 technology.good for kick subs,dont distort and over drive ,for that get two 8" commercial subs.
Conclusion: Bought 4 of the them to but under my back seat in my 2009 Ford F-150 Super Crew Cab. I made a custom box to fit. The hit hard and sound great. Small enough not to have to change any sitting. Had them shipped to a location in the US and then shipped to me in the Middle East.
Summary: I got this sub to replace my old factory sub from my 93 thunderbird and by long is way better then the old one really good base for been a 6 1/2 inches sub you won't get the power of a 8 or 10 inches sub