Browse Categories

8.0 out of 10

Kenwood KAC-9104D

First seen: 3 march 2008

Information found in: from 22 sources in 13 countries.

Great Deal: $199.00

  • User Score (21)
    9.0 9.0 from 21 reviewers
More grades Less grades

Pros & Cons

  • great overall power, and powerful, very reasonable price, lots of power, very loud
  • casing over connections, documentation is very vague, quality and installation process

The KAC-9104D Class D Mono Power amplifier cranks out mega doses of power in a much smaller chassis size (30% smaller than previous models), so it’s more adaptable to tight spaces like under seats or in trunks. The KAC-9104D also has a Dual Mono Drive connection that allows you to strap two KAC-9104D amps together to power a single subwoofer—that’s 1800 Watts of power!

  • 1800 Watts Maximum Output Power with 30% Smaller Chassis Size
  • 500 watts RMS x 1 at 4 ohms (900 w…

Kenwood KAC-9104D

The Kenwood KAC-9104D is a class D 1800 Watts (Maximum Output) power with 30% smaller chassis size. It has an RMS rating of 500 watts x 1 at 4 ohms (900 watts x 1 at 2 ohms) with 1-ohm stable (output regulated to 900 Watts). It has variable low-pass filter (50-200 Hz at -24 dB per octave) plus Bass Boost Control (0-18 dB at 40 Hz). The unit hasa singnal to noise ratio of 94 dB with in put sensitivity of 0.2 - 5V. It requires a power supply of 14.4 V (at 11 - 16V). It measures 13-1…

See more

Kenwood KAC-9104D

The Kenwood KAC-9104D is a class D 1800 Watts (Maximum Output) power with 30% smaller chassis size. It has an RMS rating of 500 watts x 1 at 4 ohms (900 watts x 1 at 2 ohms) with 1-ohm stable (output regulated to 900 Watts). It has variable low-pass filter (50-200 Hz at -24 dB per octave) plus Bass Boost Control (0-18 dB at 40 Hz). The unit hasa singnal to noise ratio of 94 dB with in put sensitivity of 0.2 - 5V. It requires a power supply of 14.4 V (at 11 - 16V). It measures 13-11/16 x 2-3/8 x 9-5/16 inches.

Features

The KAC-9104D Class D Mono Power amplifier is built 30% smaller than previous models with a Dual Mono Drive connection that allows users to strap two KAC-9104D amps together to power a single subwoofer for 1800W of power. It is made of aluminium die-cast heat sink with aluminium dress-plate. The unit features power MOSFET switching power supply, gold plated RCA line-in and out, terminals and plug-type speaker level input. Other features are Speaker-level inputs with signal sensing turn-on, Preamp-level inputs and outputs, 2 x 30A fuse rating, subsonic filter at 15/25 Hz (18 dB/octave), copper EE-core power transformer, Toroidal noise suppression filter and cooling fan.

See less

Reviews of Kenwood KAC-9104D

  1. Reviewer: Car Stereo Mall
    3 March 2008

    Missing Attachment Kenwood has built their reputation in building car audio amplifiers which offer outstanding reliability and advanced sound quality. The KAC-9104D is a compact mono amplifier designed by Kenwood which features a rugged aluminum cast chassis that is nearly 30 percent smaller than its predecessor and it still punches out nearly 900 watts of RMS to your subwoofers without twisting the electrical system of your car. Read more

  2. 2 July 2008

    On the other side, your signal enters the amp through a pair of RCA inputs. Use both of them and the amp sums them together for a mono (full) signal. The signal passes through a gain control, then the lowpass crossover, and finally the infrasonic filter before going to the output stage. All of the components in the signal side are surface mount with the exception of some electrolytic capacitors, which are inserted from the other side of the PCB. Read more

  1. Great for price!

    Reviewer: Amazon
    21 January 2010
    Overall 10
    10
     

    Have 2 of these hooked up to 2 12" premiers 3000 watt subs. Powers them very nicely wired to 1 ohm. I used to have 2000 watt 2 channel but these beat it by far. They are not a good as other brands of the same watts, but for half the price or more it is alot better deal. Read more

  2. Reviewer: A. Krull, review.cheapcaraudio.org
    16 January 2010
    Overall 5
    5.0
     

    I have this amp connected to two alpine type Rs in a sealed box wired to 1 Ohm and MAN IT MOVES AIR! The amp has not cutout once. I have 45 min commutes and has not caused any problems. It gets alittle warm but does a fine job of cooling its self. Great amp,sounds good and the price is right. I would buy another one again. Read more

  3. Solid Amp

    Reviewer: Crutchfield
    23 March 2010
    Overall 10
    10
     

    I had this hooked up to 2 alpine type r 12's at a 1ohm load and it hit so hard I removed one because I was losing my hearing. I don't know why people have a problem with the amp cutting out I have no problems whatsoever. True it is only putting out 644 watts RMS at 14.4 volts. I also have a 5 farad capacitor in use along with my setup maybe that helps, it helped my lights stop dimming. Before the capacitor when the bass hit hard at high levels it was actually shutting... Read more

Ask the community

Need more advice? Ask the community a question.

Newly asked questions

Video Reviews

  • Thumbnailserver2?app=vss&contentid=0c778e96f793710a&offsetms=1&itag=w160&hl=en&sigh=__8qmrbbbwn_ophjxx9xewu-tglq8=
  • Thumbnailserver2?app=vss&contentid=13d1ca0a0e707708&offsetms=1&itag=w160&hl=en&sigh=__aymfzvkpc4c71s8pefubfgyacb4=
  • Default
  • Default
  • Default
  • Default
  • Thumbnailserver2?app=vss&contentid=aded75401db5e637&offsetms=1&itag=w160&hl=en&sigh=t3riwlxbht4rhmf4bgejrjjorms
Price comparison partners:
Shopping.com  PriceScan  Shopper